8 Inch Cab King Cabochon Machine
 
The
CABKING-8V1
is
a
rugged,
professional
grade
8”
diameter
diamond wheel grinding and polishing
machine for all your cabbing needs. One of the main elements of this
machine is the water cooling system. The CABKING-8V1 has an adjustable,
independently controlled drip feed cooling system that drips clean
water on the wheels instead of bubbling up dirty water. This system is
based on a separate water pump that eliminates costly upkeep of the
built in air pump found on other machines. The water system allows for
individual cooling of the wheels and water flow can be controlled from
a drip to a stream. Our simplified drainage system has a hose connected
to the rust-free pans so you can drain the dirty pan water without
having to constantly pour it out. The advanced cooling system is just
one of the many features found in the CABKING-8V1.
Key
Features
• Durable, direct drive 3/4 HP, 1800RPM motor, 110V
• Independently controlled drip feed water cooling system
• 2 electroplated diamond grinding wheels 8” x 1.5”, 80# and 220#
• 4 resin diamond pre-polishing wheels 8” x 2”, 280#,600#,1200#,3000#
• Full face 8” diamond lap for grinding flats
• Stainless steel, removable, independent hoods
• Rust free, easy to clean, drip pans can be set up for forward or rear
drainage
• Built in adaptor for polishing or grinding laps on both shafts
• Separate 30 watt water pump with on/off foot switch
• Water drainage system to eliminate constantly draining drip pans
• Built-in light and metal adapters for other types of lamps
• Removable stone trays and hand rests
• Polishing accessory kit (canvas disc, diamond paste, goggles, apron)
• Ability to use the same Trim Saw attachment as the CABKING-6V3
• Versatile shaft which can accept a variety of 1” arbor wheels
• Assembly required attach motor to base board & mount wheels
Comes
in
three
boxes
(assembly
required).
Motor box - 75lb, 40" x 13" x 14"
Hood/pan/baseboard/accessories - 58lb, 50" x 17" x 18"
Wheels - approx 25lb, 20" x 14" x 11"
Footprint - 42" x 16"
Assembled weight: 160lb
Model
#
CABK08
110V
60
HZ
$2,399.00
Trim
Saw
Attachment
$299.00
Model #CABTSA
The
Cab
King
Trim Saw Attachment features an 8"
sintered blade, plastic blade guard, drip pan, pan support, splash
guards, saw platform, and an additional platform for small rough
stone. Spin off the right hand wheel and adapter, and spin on the
special saw adapter with blade, set in place, and start cutting.
Shipping weight 5 lbs.
|
6 Inch CAB KING
Cabochon Machine
A complete
6” diamond grinding and
polishing
machine
Has
a 1/4 hp, 110v, 1800
rpm, 60hz motor, a 30 watt, 605 GPH, 110/115 volt pump.
With a 6 watt,
12 volt, single bayonet lamp.
Features:
- Direct
drive motor and separate submersible pump to reduce maintenance.
- Individual
on/off water shut off valves above each wheel, also for right and left
hand grinding/polishing pads (no cross-contamination of grit) allows
easy movement from wheel to wheel to disc.
- A
drainage system to eliminate having to constantly discard pan water.
- Heavy-duty
base board, aluminum splash hoods with adjustable clear splash shields,
plastic pad with drain holes, comes with four side splash guards, and
two front hand metal rests.
- Plastic
apron, wrench, clear plastic goggles, complete instructions.
- One (1)
each 6” x 1-1/2” 80 grit and 220 grit metal bonded diamond grinding
wheels, (4) 6” x 1-1/2” diamond resin bond wheels, (1) each 280 grit,
600 grit, 1200 grit, and 3000 grit, a 6” 360 grit no hole 1/4-20 right
hand threaded diamond flat lap and a 5-1/2” 1/4-20 right hand canvas
polishing pad with 2 gram syringe of 14,000 diamond paste compound.
- One
year limited warranty on motor and parts.
Overall size
is 27” long x 13” deep x 12” high. Shipping Weight 55 lbs.
Model
#
CABK06
110V
60
HZ
$1,399.00
How
to
order:
Machines
are
assembled
and
shipped
to
you
direct
from
the
manufacturer.
Please
call
us
or
email
us
for
a
shipping
quote.
We
will call you or email you back with the order
total. Once we have come to agreement, we will send you
an invoice to pay us securely through PayPal. You may also mail
us a
money order or cashiers check. Please note: We ship to USA
only by FedEx or by motor freight carrier, no international sales.
Bill
Staggenborg
541-954-0039
Click
Here
to
Email
Me
for
Shipping
Quotes,
Questions
and
to
Purchase!
|
Copyright
©
Willamette
Valley
Rocks
2010
|
|
